Fluke TIP900 Operating Instructions Manual page 46

Operation
Save Recipe as:
7
Load Reference/All Decks: Herewith you are able to force the TIP900 program to set for every
8
Load Reference:
9
Shapes Proposition:
10
Default Shapes:
11
Clear Deck Shapes:
12
46
The Save Recipe As button is to ease the creation of a new recipe by
using an already created one. It's far more convenient to use a preset
recipe as a template for a new recipe, which differs marginal.
dryer deck a reference board map in on step. All dryer decks get the
same reference board map assigned. This is just preferable, if all the
dryer decks are well optimized. That means the kiln temperature
distribution is nearly identical for all decks.
Herewith you are able to set an individual reference board map to each
individual dryer deck. First you have to select the deck number by
clicking onto one image in the "Select deck" column
the Load Reference button, to select a convenient board map image.
The procedure has to be repeated for every available deck and is
necessary, if the kiln temperature distribution varies much between the
decks. A second, much more comfortable and error reducing method
is the reference map to deck assignment, by an integrated capability in
the deck history display domain. This works, if you're logged in as a
supervisor. Herein you have to select a specific deck number, where
the board map snapshot seems suitable as a good deck reference.
Click with the left mouse button or touch button onto the preferred
board map and select "Load as reference into the recipe editor" to
assign the selected board map to the deck of the currently used recipe.
Such proceeding is much more comfortable and less fault-prone in
comparison to the above described individual reference map selection.
With the Shapes Proposition button is an automatic SW capability
assigned, which enables to identify correct board map shapes. In
processes, where the boards are very close to each other, correct gap
detection is sometimes difficult to blank out the background zones in
average temperature calculations.
The button is to assign a default board map shape to one specific deck.
It's just for using this board map shape to draw it at the corner marks
to bring the shape in coverage with the current board map. Such
proceeding overrules the previously assigned board map limits by a
manual correction for optimization.
The Clear Deck Shapes button releases the already assigned board
map shapes per deck. Every deck has to be treated individually to
release the shape from the board map.
Rev. E1 Feb 2016
and press
2
TIP900