Figure 44: Scanner Tab Screen In Supervisor Mode - Fluke TIP900 Operating Instructions Manual

Operation
IP address:
Port:
Net mask:
Lines to AVG:
Emissivity:
Transmissivity:
Flipped X-Axis:
Flipped Y-Axis:
52
Scanner Tab

Figure 44: Scanner tab screen in Supervisor mode

-- Scanner: Interface--
The IP address of the scanner in the network. The default IP
address is "192.168.42.30".
The port to be used for the communication with the scanner
in the network. The default port number is "2727".
The net mask of the scanner. The default net mask is
"255.255.255.0".
-- Scanner: Parameter--
The number of lines for averaging. Allowed values are "0 –
9000".
The emissivity of the material to measure. In gypsum
wallboard production, it's the surface material emissivity.
The transmissivity of the scanner window (glass cover).
-- Scanner: Snapshot--
Flip X-Axis of the scanner snapshot.
Flip Y-Axis of the scanner snapshot.
Rev. E1 Feb 2016
TIP900