Figure 48: Dust Filter Change Confirmation, To Keep The Configured Filter Change Interval - Fluke TIP900 Operating Instructions Manual

Operation
Maintenance Information for the dust filter change

Figure 48: Dust filter change confirmation, to keep the configured filter change interval

To guarantee a proper running TIP900 system, a defined dust filter change has to be performed after a
specified time period.
The dust filter change has to be applied for all TIP900 dust filters, which are installed in the Protective
Housing for the scanner and the Touch Panel PC.
A filter change period has to be determined by Supervisor experience in relation to production domain
dust pollution.
If a filter change interval is fixed, the interval time needs to be set in the configuration menu under
Supervisor responsibility.
When the filter change interval expires, the TIP900 program reminds you to perform the filter change.
The reminder pops up every 24h, if no filter change confirmation is given in the maintenance window
above.
If the button "Filter Changed" is confirmed by the Supervisor, the current date is taken over into the "Last
Change (UTC)" field. The "Next Change (UTC)" field entry is calculated by the preset filter change
interval (configuration menu) and updated as well.
56 TIP900
Rev. E1 Feb 2016