Table of Contents
Advertisement
4.5
Setting the Temperature
In the following discussion and throughout this manual a button around the
word SET, UP, EXIT or DOWN indicates the panel button while the dotted box
indicates the display reading. Explanation of the button or display reading are
to the right of each button or display value.
To view or set the bath temperature set-point proceed as follows. The front
panel LED display normally shows the actual bath temperature.
24.68 C
When "SET" is pressed the display shows the set-point memory that is cur-
rently being used and its value. Eight set-point memories are available.
S
1.
Press "SET" to select this memory and access the set-point value.
S
C
Press "UP" or "DOWN" to change the set-point value.
U
C
30.00
Press "SET" to accept the new value and display the vernier value. The bath be-
gins heating or cooling to the new set-point.
S
0.00000
Press "EXIT" and the bath temperature will be displayed again.
E
24.73 C
Bath temperature display
Access set-point selection
Set-point 1, 25.0°C currently used
25.0
Access set-point value
Current value of set-point 1, 25.00°C
25.00
Increment display
New set-point value
Store new set-point, access vernier
Current vernier value
Return to the temperature display
Bath temperature display
4 Quick Start
Setting the Temperature
13
Advertisement
Table of Contents
