Figure 20: Tip900 Definitions For Wallboard, Image Orientation And Pixel Numbering - Fluke TIP900 Operating Instructions Manual

Installation

Definition of wallboard-numbering, pixel counting, viewing orientation and suggested installation
positions regarding an established production flow orientation
o
Clear definition of an unambiguous viewing position, which is against the production
flow in the direction of the kiln discharge
o
Clear assignment of passing gypsum wallboards in accordance to the correct
screen/window domain on the touch panel display. The manner of counting and
numbering is from left to right, starting with 1 (outer left wallboard) to n (outer right one).
o
Clear definition of pixel counting and assignment to the scanned thermal images. The
manner of X-pixel counting for the passing boards is defined form the outer left position
up to the outer right position of the inner conveyor width. In dependence of the chosen
scan resolution for the thermal imager, the X-pixel numbering is in the range of 1-256,
1-512 or 1-1024. The manner of Y-pixel counting for the passing boards is defined from
the leading edge up to the trailing edge, starting with 1 (leading edge) up to n (trailing
edge).
o
The installed hardware devices have to work properly together with complex software
functions. No pixel flip over or wrong wallboard orientation has to be corrected by SW.
Regarding the defined viewing orientation, the thermal imager needs to be mounted in
such a way, that the scanned thermal line starts from the outer left position (1) of the
inner conveyor width. A standard installation position of the Protected Housing with the
correct thermal imager orientation in the housing has to be defined, to guarantee an
easy and understandable hardware installation procedure.

Figure 20: TIP900 Definitions for wallboard, image orientation and pixel numbering

26
Rev. E1 Feb 2016
TIP900