Checking Disc Timing Tool And Spindle Nut Wrench - MacDon R113 Unloading And Assembly Instructions

10.15 Checking Disc Timing Tool and Spindle Nut Wrench

The R113 Rotary Disc Headers are shipped with a two part disc timing tool and a spindle nut wrench on the panel at the
left end of the header.
1. Confirm that two part disc timing tool (A) (stacked
together) and spindle nut wrench (B) are stored on the
panel at the left end of the header.
262300
PERFORMING PREDELIVERY CHECKS
Figure 10.35: Disc Timing Tool on the Panel
133
B
A
Revision A