Adjusting Conditioner Drive Belt - MacDon R113 Unloading And Assembly Instructions

10.1.1 Adjusting Conditioner Drive Belt

If necessary, adjust the conditioner drive belt tensioning spring to the correct length.
1. Open the left driveshield. For instructions, refer to
2. Turn jam nut (A) counterclockwise to unlock the
tension adjustment.
3. Turn adjuster nut (C) clockwise to increase the spring length
(tension) or counterclockwise to decrease the spring length
(relax).
4. Set overall spring length (B) to 365 mm (14 3/8 in.).
5. Close the driveshield. For instructions, refer to
Driveshields, page 137.
262300
PERFORMING PREDELIVERY CHECKS
11.1 Opening Driveshields, page
11.2 Closing
Figure 10.2: Conditioner Drive Belt
110
135.
A
C
B
Revision A