Preparing Power Cables And Copper Bars - Huawei UPS5000-S-1200 kVA User Manual

UPS5000-S-1200 kVA
User Manual

3.1.3 Preparing Power Cables and Copper Bars

The UPS can generate large leakage currents. A circuit breaker that provides
leakage current protection is not recommended.
Prepare wiring copper bars based on the following figures and current
requirements.
Figure 3-4 Distances between the top copper bars of the bypass unit and input
and output unit (unit: mm)
(1) The area marked by the line box is reserved for dense busway.
(2) No power distribution box (PDB) or cabling is allowed inside the area marked by the line
box.
Issue 10 (2023-05-26)
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
3 Installation
59