Table of Contents
Advertisement
UPS5000-S-1200 kVA
User Manual
Figure 3-13 Expansion bolt composition
(1) M12 bolt
Ensure the expansion tube of the expansion bolts fits completely into the hole.
The expansion sleeves must be completely buried under the ground to properly
facilitate subsequent installation.
Figure 3-14 Installing expansion bolts (unit: mm)
1.
2.
3.
4.
Issue 10 (2023-05-26)
(2) Spring washer
NO TICE
Drill holes in the ground by using a hammer drill. The hole depth is 52 mm to
60 mm.
Partially tighten the expansion bolt and vertically insert it into the hole. Hit
the expansion bolt using a rubber mallet until the expansion sleeve is fully
inserted into the hole.
Partially tighten the expansion bolt.
Remove the bolt, spring washer, and flat washer.
Copyright © Huawei Digital Power Technologies Co., Ltd.
(3) Flat washer
3 Installation
(4) Expansion sleeve
70
Advertisement
Table of Contents
