Huawei UPS5000-S-1200 kVA User Manual page 73

UPS5000-S-1200 kVA
User Manual
Position
Top connecting plate
Middle connecting
plate
Bottom connecting
plate
Procedure
Step 1 Open the front door of the bypass unit and input and output unit.
Step 2 Remove the rear covers from the bypass unit and input and output unit.
Step 3 Remove the PE, N, L1, L2, and L3 copper bars.
Figure 3-8 Removing copper bars
Step 4 Disconnect the cable terminals as shown in the figure, and remove the U, V, and
W copper bars and epoxy boards.
Issue 10 (2023-05-26) Copyright © Huawei Digital Power Technologies Co., Ltd.
Screw Specifications
M6x30
M6x30
M12x45
3 Installation
Quantity (PCS)
4
8
8
65