Table of Contents
Advertisement
UPS5000-S-1200 kVA
User Manual
Step 2 Use a hammer drill to drill holes for installing expansion bolts and then install
expansion sleeves in the holes.
Step 3 Install side plates for the bypass unit and input/output unit.
Step 4 Remove the rear door from the cabinet.
Step 5 Remove the door header from the rear of the cabinet.
Figure 3-54 Removing the door header (rear view of the cabinet)
Step 6 Install the fan unit accessories at the rear of the cabinet.
Figure 3-55 Installing the fan unit accessories (rear view of the cabinet)
Step 7 Reinstall the rear door plate without meshes in the door header and fan unit
accessories.
Step 8 Install the anchor baffle plate at the rear of each cabinet.
Figure 3-56 Installing the anchor baffle plate at the rear of the cabinet
Step 9 Secure the cabinet.
1.
Issue 10 (2023-05-26)
Combine power unit 1 and the bypass unit. (Install anchor screws close to the
wall for the bypass unit, install connecting kits at the bottom, top, and then
middle of the cabinet, and secure the anchor screws under the front door of
the cabinet.)
Copyright © Huawei Digital Power Technologies Co., Ltd.
3 Installation
92
Advertisement
Table of Contents
