Huawei UPS5000-S-1200 kVA User Manual page 133

UPS5000-S-1200 kVA
User Manual
Item
IP address
Subnet mask
Gateway
NAT
mapping
Figure 4-16 RS485 communication settings
Item
Address
Issue 10 (2023-05-26)
NO TE
After you restart the device, IP address allocation changes back to Manual. The IP address
is set to the IP address set previously.
Description
Specifies the IP address for
the Ethernet.
NOTICE
Ensure that the UPS IP address
is unique on the network
segment. Otherwise, the WebUI
display function may not
function properly.
Specifies the subnet mask of
the Ethernet.
Specifies the Ethernet
gateway.
NAT means network address
translation. If it is set to
Disable, Internet cannot
access IP addresses in the
local area network (LAN).
Description
This serial port address is
allocated by the user.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 User Interface
Default Value Value Range
192.168.0.10 1.0.0.0–
223.255.255.25
5
255.255.255.0 0.0.0.0–
255.255.255.25
5
192.168.0.1 1.0.0.0–
223.255.255.25
5
Disable Disable,
Enable
Default Value Value Range
1 1–254
125