Operation; Before Starting; Master Switch - Switching On; Driver Seat (Std) - Adjustment - Fayat Group DYNAPAC CC1300C Instruction Manual

1
Fig. Engine compartment
1. Battery disconnector
2. Power socket, 12 V
1
Fig. Driver seat
1. Handle - Length adjustment
2021-12-14

Operation

Before starting

Master switch - Switching on

Remember to carry out daily maintenance. See the
maintenance instructions.
The battery disconnector is on the left side in the
engine compartment.
Turn the key (1) to switched on position. The roller is
now supplied with power.
2

Driver seat (Std) - Adjustment

Adjust the operator's seat so that the position is
comfortable and so that the controls are within easy
reach.
The seat can be adjusted as follows.
- Length adjustment (1)
4812162101_D.pdf
The engine hood must be unlocked during The engine hood must be unlocked during
operation, unless the battery disconnector is freely operation, unless the battery disconnector is freely
accessible from the outside, so that the battery accessible from the outside, so that the battery
voltage can be quickly disconnected if necessary. voltage can be quickly disconnected if necessary.
Always check that the seat is in locked position Always check that the seat is in locked position
before starting. before starting.
Operation
39