Features And Interfaces; Onboard Ssd - Kontron COMe-mSP1 User Manual

4 Features and Interfaces

4.1

Onboard SSD

The COMe-mSP1 features an onboard Greenliant PATA NAND flash drive with capacities of 512MB to 8GB SLC (PATA). Due to
performance and longevity reasons standard variants with onboard flash use SLC type only. The following PATA NANDrives
are available:
Basic features of the PATA NANDrives
» 16-bit ATA/IDE Bus Interface with PIO Mode-6, Multi-Word DMA Mode-4 and Ultra DMA Mode-4
» RoHS compliant NAND flash type
» Hardware error detection and correction ECC
» Advanced wear leveling
» Bad block management
SLC NANDrive™
Flash Part No. GLS85LP0512P-S-I-LBTE
Temperature Range -40°C to +85°C
Flash Size 512MB
NAND Type SLC NAND
Sustained Read Speed 25 MB/s
Sustained Write Speed 6 MB/s
Total Bytes 456,744,960
Max LBA 892,080
Cylinders/Heads/Sectors 885/16/63
Active Mode Power 200mW
Program/Erase Cycles per Block 100k
(Data based on GLS85LPxxxxP Datasheet Rev. 02.000 from 06-2012)
The NAND Flash types listed above are available on COMe-mSP1 hardware revision CE4.7.0
and COMe-cDC2 hardware revision CE 2.4.1 or newer. Please contact your local sales or
support for Flash specifications of SST Flash used on older revisions
27
GLS85LP1002P-S-I-FTE GLS85LP1004P-S-I-FTE
-40°C to +85°C -40°C to +85°C
2GB 4GB
SLC NAND SLC NAND
28 MB/s 50 MB/s
11 MB/s 20 MB/s
2,000,388,096 4,068,384,768
3,907,008 7,946,064
3,876/16/63 7,883/16/63
200mW 265mW
100k 100k
COMe-mSP1 / Features and Interfaces
GLS85LP1008P-S-I-FTE
-40°C to +85°C
8GB
SLC NAND
50 MB/s
39 MB/s
8,136,769,536
15,892,128
15,766/16/63
365mW
100k