Table of Contents
Advertisement
Count:
device cycle counter, absolute and incremental.
Cannot be modified.
10.7
PROGRAM ENABLING – PR EN
PR EN:
Setting which allows display and selection only of the
washing programs actually of interest.
Press P5 to access Program Enable: the boxes
underneath PR EN illuminate and buttons P4 and P6
can be used to scroll the various programs and their
state.
To exclude a program from the list displayed, set
"OF" next to its number (e.g. "P06:OF").
Press button P2 or P8 briefly: "ON" changes to "OF"
and starts flashing; it will continue to flash until P5 is
pressed to confirm.
10.8
SETTING A
– Setup A
0
Parameter which allows modification of the value
of A
for all cycles except CLOSTRIDIUM.
0
The Set A
menu is accessed using buttons P4 and P6.
0
After accessing SETA
, press P5 to access the A
0
modification mode: the A
number of the program on the first line and the
associated value on the second line.
Scroll with buttons P2 and P8 to change the value.
Confirm with button P5. Press buttons P4 and P6 to
scroll the programs.
The parameter can be edited by the Superuser, from
a minimum of 60 to a maximum of 6000.
Settings are in steps of:
User Manual
0
icon (F5) lights up with the
0
193909105 rev.02
0
BPW1260
Page 59 – 93
Advertisement
Table of Contents
