Thank you for your confi dence in purchasing our washing machine, and congratulations on the excellent choice. Your new washing machine meets the requirements of modern treatment of laundry. It is rational in the consumption of energy, water and washing agents. Our appliances are friendly to the environment.
Description of washing machine 1. Front panel 2. Detergent dispenser 3. Door (depending on the model) 4. Filter lid Technical information 5. Adjustable legs 6. Water outlet hose 7. Water inlet hose 8. Mains power cable Dimensions (w x d x h): 600 mm x 600 mm x 850 mm Depth with door open: 106 cm Weight (net): 75 kg / 76 kg Nominal voltage: 230 V, 50 Hz...
Cautions • Be sure to remove transport brackets prior fi rst use of the appliance. Attempted operation of the blocked machine may result in irreparable damage which is not covered by the manufacturer’s warranty! • When connecting your washing machine to water supply, be sure to use brand new water inlet hose and appropriate sealing gaskets (attached).
Installation and connection Package removal Package removal Removal of transport Removal of transport brackets brackets Leveling the appliance Leveling the appliance In removing the wrapping be careful not to damage the appliance with a sharp object. Before connecting the appliance, let it warm up to room temperature (wait for two hours).
Water inlet connection Water inlet connection • If you have a tumble dryer of the same dimensions, you can place it on top of the washing machine. To ensure correct operation of the appliance, water pressure inlet must be between 0,05 and 0,8 MPa. Minimum water pressure can be established by measuring the quantity of poured out water.
Page 7
Water outlet connection Water outlet connection Connect the appliance to Connect the appliance to the mains supply the mains supply • Fix the outlet hose to run into the sink or the bathtub, or connect it directly to the wall drain outlet (diameter min. 4 cm). •...
Operation A - program selector B - MENU knob C - SELECTION knob D - short program knob Program selector Functional knobs Knob B (MENU) - Use this knob to scroll around main menu. Knob C (SELECTION) - Use this knob to scroll around main menu. Knob F (START/PAUSE) - Use it to start or fi...
Before fi rst use Before fi rst use Washing procedure Washing procedure Washing machine Washing machine operation operation - Selecting language To change the language in which the information appear on the display, press simultaneously the key MENU (B) and SELECTION(C), and turn the program selector (A) from position “0”...
Page 10
1. Name of the program, 2. Duration or time of day, 3. Symbols for activation of additional functions, 4. Water quantity in liters, 5. Spin RPM Program is selected by turning the program selector from the “0” position to the desired washing program. The display indicates particular washing program, selected by the program selector.
Page 11
Delicate This is a program for delicate fabrics (dresses, skirts, blouses) and curtains. Wool Especially gentle program for washing wool and garments made from mixture of other fabrics with wool, appropriately marked for machine washing. Manual wash Very gentle program concluded with short gentle spin (max. 400 RPM).
Page 12
are displayed in sequence. If you do not wish to activate or change certain displayed function, press knob B (MENU) to move to the next available function.Functions with the choice of multiple available settings, display the default one in bold (spin RPM, extra rinse, more water, sound signal).
wash. Then turn knob A to set the pointer to the temperature of the desired program corresponding to the relevant washing time, according to the chart below. Washing time (minutes) Programs cotton cotton cotton synthetics synthetics synthetics delicate delicate wool wool manual wash jogging...
Page 14
In case you wish to change or suspend the delayed start after starting the machine with the START knob (F), you may do so by pressing the MENU knob (B). The delayed start appears; using the SELECTION button (C) reset the delay period. End of program (certain models only) Caution: prior this setting check whether the current time of day...
Page 15
- Press the START/PAUSE button (F) and reactivate the child lock. In case you fail press any knob within 15 seconds, the protection is automatically reactivated. Permanent disengagement of the function: a.) During the operation: - Keep the MENU knob (B) pressed for 4 seconds. - Stop the program by pressing the START/PAUSE knob (F).
Page 16
Start the operation Start the operation - Adding washing and softening agents (see tips for washing and energy saving) • pre-wash compartment • main wash compartment • softener compartment If you do not apply the program which includes the pre-wash feature, you may add washing detergent directly into the drum, using the measuring vessel.
Page 17
Interruptions Interruptions - End of operation • Sound signal indicates that you may now open the door of the machine. • Extract the laundry from the drum and remove any alien objects from the door gasket. • Leave the door ajar to allow the interior to dry. •...
Special functions Special functions (certain models only) (certain models only) After certain time you may open the door if the water level in the drum is low enough, otherwise you must fi st empty the water (use additional program Pumping water out MA (models with the door opening by pressing the G knob feature the function which enables you to open the door of the appliance during power failure using special lever, located...
Tips for washing and energy saving • Before washing sort out the laundry according to the type, degree of dirtiness and color resistance. • Prior selecting the washing program consult the sewn tab with information on a particular piece of laundry (see Maintenance chart on the last page). •...
Cleaning and maintenance underwear, etc.) into the special bag. • High spin RPM leave less moisture in laundry which dries out much quicker in the tumble dryer, thereby saving energy. Do not put clods of detergent into the soap dispenser as the tube in the washing machine may clog.
Page 21
• Wash it under running water using a brush, and dry it. Remove any leftover dried detergent from the bottom of the casing. • Clean the entire rinsing area of the washing machine with a brush, especially the nozzles on the upper side of the rinsing chamber.
Failures If the washing machine identifi es failures in the operation, it reports it immediately. Sound alarm is heard and the display reads ERROR. Number identifi es the type of failure. In some cases you may attempt removing certain failures yourself (see the chart below), and the machine will continue to perform the operation after pressing the START knob (F).
Page 23
Failure Possible cause The machine does not Machine is not powered. work (display is not illuminated). Water does not enter Filter is not tightly screwed in. the machine. Inlet pipe is not tightly screwed to the machine or to the water faucet.
Page 24
Failure Possible cause Softener is not Sucking cover is not correctly completely rinsed, positioned or is clogged. or water is left in the dispenser dish. Washing time is longer • Low temperature of inlet water. than usual. • Due to unevenly distributed Time indicated on the load, the machine has activated display is corrected...
Maintenance chart Normal wash Max. washing temp. 95°C Delicate wash Whitening Whitening in cold water Ironing Hot iron max. 200°C Dry cleaning Dry cleaning in all solvents Drying Place on fl at surface PS PG3,4 OEM SME Max. Max. Max. washing washing washing...