Connections To The Device - Smeg BPW1260 User Manual

Legend of abbreviations used for the water intake connections.
CODE INTAKE/DRAIN
CW
HW
POSITION OF WATER INTAKE TAPS: the water intake taps cocks must be located next to the device, in an
easily accessible position. They may be placed on the right or left of the device or at the bottom left as shown
in the blue zone.
WARNING
The taps and hoses must be positioned in such a way that removing the hoses from the taps for
service procedures does not cause water spills onto the device.

15.2.4 CONNECTIONS TO THE DEVICE

ID DESCRIPTION
CW Cold mains water intake hose
HW Hot mains water intake hose
C Power supply cable
D Water drain trap
P1 Peristaltic pump P1 intake hose and P1 jerry can detergent level sensor cable
P2 Peristaltic pump P2 intake hose and P2 jerry can detergent level sensor cable
H RS-232 port for printer connection
U USB port for data upload and download
L LAN port
User Manual
INTAKE Cold water hose – CW (cold water)
INTAKE Hot water hose – HW (hot water)
BPW1260 rear view
193909105 rev.02
WATER TYPE
BPW1260 Page 89 – 93