Safety And Precautions For Use; Key To The Symbols Used In The Manual And On The Device - Smeg BPW1260 User Manual

5 SAFETY AND PRECAUTIONS FOR USE

5.1

KEY TO THE SYMBOLS USED IN THE MANUAL AND ON THE DEVICE

The following is the key to the symbols used on the device and in this manual, as required by IEC 61010-2-
040.
SYMBOL MEANING
Read this information carefully.
Symbol which appears beside particularly important instructions or warnings.
Power "ON"
Standard symbol (IEC 60417:1 – 5007): appears on the electrical main switch, if provided on devices,
to indicate connection to the mains power supply.
Power "OFF"
Standard symbol (IEC 60417:1 – 5008): appears on the electrical main switch (circuit breaker) to
indicate disconnection from the mains power supply.
Manufacturer
The symbol appears on the product's technical dataplate, accompanied by the name and address of
the medical device's Manufacturer.
(ISO 15223-1 – Symbol 5.1.1, ISO 7000 no. 3082)
Country of manufacture
The symbol indicates products' country of manufacture (IT). If it is accompanied by a date, this is the
date of reference for manufacture.
(ISO 15223-1 – Symbol 5.1.11, "Country of manufacture")
Consult instructions for use.
The symbol appears on the product's technical dataplate to indicate that users must consult the
instructions for use of the device.
(ISO 15223-1 – Symbol 5.4.3, ISO 7000 no. 1641)
Warning, danger.
The symbol appears in the manual next to safety instructions.
Warning, hot surface.
The symbol is affixed to the device close to parts which may heat to high temperatures and constitute
a burn hazard – do not touch parts near this symbol. The symbol appears in the manual to emphasise
safety instructions relating to the burn hazard.
Warning, electric shock hazard.
The symbol is affixed close to live parts – the device's power supply must be disconnected before
doing any work on these parts. Do not touch live parts if the power supply has not been
disconnected.
Specific Notes and Precautions for the Hospital Sector.
USB port – Data communication and programming of the device.
Transport, storage and unpacking precautions.
Biological hazard.
User Manual 193909105 rev.02 BPW1260 Page 23 – 93