Program Completed With Anomalies - Warnings - Smeg BPW1260 User Manual

9.9
PROGRAM COMPLETED WITH ANOMALIES – WARNINGS
If the program has been completed but events to which the user must be alerted have occurred, the code
of the anomaly appears on the second line with the prefix "W" for "Warning".
The user must refer to the Warning table to assess the alert.
The user cannot unlock the door and access the load until they have acknowledged the warning with the
"confirm" button.
➢ To acknowledge the warning: Brief pressure on key P5 (Confirm).
If multiple warnings are active (at end of cycle): the first one to occur is shown.
After the first one has been acknowledge the system moves on to the second one, and so on.
The list of Warnings and their meanings is provided in the "Warning Table" (section 13.1.1): each is identified
by the letter "W" followed by the specific number.
User Manual 193909105 rev.02 BPW1260 Page 49 – 93