Table of Contents
Advertisement
9.4
WITH CYCLE PRESELECTED – INFORMATION ABOUT PROGRAM PARAMETERS
Facsimile of central display
Fig. 1
Fig. 2
9.5
SELECTING A PROGRAM
Starting from the preselected program, use the selector buttons (right/left) to scroll the programs available.
To select the Clostridium program (if available and enabled), press "CLO" button (P8) briefly.
Program Pr 08 appears on the display with "CLOST" on the second line and the Clostridium treatment icon
illuminates
When the cycle starts CLOST is replaced by info as for all the other cycles.
User Manual
Description of information
With cycle selected but not started, the display shows:
193909105 rev.02
1. Program name (e.g. "Pr 01")
2. Number of phases in program, except cooling
phase: by illumination of rectangles in bar.
From 1 to 7 phases. For programs with no. of
phases ≥ 7 all the rectangles in the bar remain
on.
3. A
programmed for the cycle (Fig. 1) alternating
0
with the cycle time (Fig. 2)
4. Cooling icon on (not flashing) if the program
phase is included and the dryer is installed.
5. A
icon only present if the program includes a
0
thermal disinfection phase (combined with the
A
value).
0
6. Td icon: only appears in programs which contain
a thermal disinfection phase.
7. Padlock icon: if door is locked.
8. WiFi icon: only if active.
9. Start/Stop icon: for starting the program (door
locked, device on, program preselected).
BPW1260
Page 45 – 93
Advertisement
Table of Contents
