Interrupting The Current Program; Program Completed - Smeg BPW1260 User Manual

Bedpan washers – hospital sector

Hide thumbs Also See for BPW1260:

Table of Contents

9.7.1 INTERRUPTING THE CURRENT PROGRAM

To interrupt a running program, touch the "On-Off" button (P9) briefly.

The message "STOP?" will flash on the second line of the display.

Confirm and reset the device by pressing the confirm button P5.

On completion of the Reset, FAIL appears.

To eliminate the FAIL message without changing program, acknowledge it by pressing the confirm button

(P5), or select another program using buttons P4 and P6.

9.8

Program completed successfully: the word END appears (not flashing) on the second line of the display.

Unlock the door with the "padlock" button (P7) to open the door and remove the load.

User Manual

193909105 rev.02

BPW1260

Page 47 – 93

Table of Contents