Initial Instructions - Smeg BPW1260 User Manual

1 INITIAL INSTRUCTIONS

READ THIS USER MANUAL WITH CARE
This manual is an integral part of the device. Take good care of it and keep it to hand throughout the device's life cycle.
This manual and all the information it contains must be read carefully before using the device. Failure to read, any
misunderstanding or incorrect interpretation of the instructions provided in this manual may lead to misuse of the
device, put the operator at risk and impair the device's performance.
Installation, maintenance and any repairs must be carried out by authorised technical staff.
Apart from leading to forfeiture of warranty cover, repairs performed by unauthorised staff may
put the user's safety at risk.
Any components must always be replaced with genuine spare parts.
Use of the device in breach of the instructions provided by the manufacturer may jeopardise the
specified protection level (safety of the device) and the warranty cover for it (ref. IEC 61010-1).
This device's performance and safety have been tested with reference to the chemical products
recommended by the Manufacturer.
The Manufacturer declines all liability for uses other than those stated above.
Consumables (detergents, air filters, thermal printer paper, etc.) are not covered by the
warranty, except for any manufacturing defects.
The Warranty does not cover any parts found to be faulty due to negligent or careless use,
improper use, failure to comply with the device's operating instructions, incorrect installation or
maintenance, maintenance or repairs performed using by unauthorised staff or repairs made
with non-genuine parts, damage during transport, or any circumstances in which the device's
defects cannot be traced back to manufacturing faults. Any work relating to installation and
connection to the intake and drain systems, and the maintenance work described in the user
manual, are also excluded from the Warranty.
Any accessories may not be installed on the device by the user; this must be done by authorised
technical staff.
To request informative documentation to accompany accessories: contact the authorised dealer
and/or the authorised after-sales service, using the contacts provided in this manual (ref.
IEC61010-2-040).
The information in this manual is provided for guidance only. The contents and the equipment described may be subject
to change without notice. Illustrations and the colours used in photographs, drawings and the forms which reproduce
the display are purely guideline, and intended to ensure that the user correctly understands the operating concepts
described in the text.
User Manual 193909105 rev.02 BPW1260 Page 7 – 93