Smeg BPW1260 User Manual page 44

ICON MEANING – With cycle preselected
Flashing with exclamation mark: the
number of hours after which the cooling
filter must be changed has been reached.
Setup in progress.
Alarm detected. Off
Indicates that the WIFI module is installed
and in operation
On (not flashing): a device is connected.
Flashing: data exchange between devices
in progress.
Flashing: data being downloaded to the
device (e.g. firmware update).
Flashing: parameters being saved.
On (not flashing): saving completed. The
icon remains on for t_s=3 seconds.
Icon off: when no data saving is in
progress.
User Manual 193909105 rev.02
MEANING – With cycle running
cooling filter must be changed has been
reached.
\
Flashing: the device is processing an alarm
which will cause it to shut down; the alarm
is identified on the display below as AF:01,
AF:02, etc...
On (not flashing): the device has
confirmed an alarm which has caused it to
shut down.
\
\
\
\
BPW1260 Page 44 – 93