Table of Contents
Advertisement
13.2
ALARMS
The device signals an alarm event with the specific icon and the code of the alarm on the second line of the
display.
The user must press the Confirm button to acknowledge the alarm.
Example of display of alarm code and Alarm Icon
Acknowledging the alarm
The device deals with the situation automatically, performing a reset cycle which drains the water from the
tank and cools it if the temperature inside is high. At the end of the reset, the interface shows the "FAIL"
screen, to clearly indicate that the cycle which was running previously has failed.
Reset cycle in response to an alarm event
User Manual
193909105 rev.02
BPW1260
Page 73 – 93
Advertisement
Table of Contents
