As shown in section 15.2 "PRODUCT DIMENSIONS AND DRAIN CONNECTION", the authorised engineer
adjusts the trap at the right height for the connection in the wall or floor (optional floor drain trap) and then
fits it into the socket provided on site to make a watertight connection with the seal on it.
SOCKET SEAL
(SUPPLIED ON SITE)
DRAIN CONNECTION SOCKET
(SUPPLIED ON SITE)
N.B.: to simplify this procedure, the drain trap can be disconnected from the chamber by
undoing the screw tie fitting, taking care to reconnect it once the drain connection has been
made.
User Manual
193909105 rev.02
DEVICE DRAIN TRAP
BPW1260
Page 36 – 93