Table of Contents
Advertisement
9.7
PROGRAM RUNNING
When a cycle is running the following appear on the display in rotation:
1. The number of the program now running is on the top line.
2. Current phase: by means of flashing icon on progress bar.
3. The second line shows the following, in rotation:
a. Time remaining
b. Chamber temperature
c. Chemical dispensing when in progress
d. A
value
0
Each piece of information is accompanied by the relative icon for greater clarity.
Example of display of parameter A
appears on the second line.
Example of display of Time remaining to end of cycle. The clock icon is illuminated.
9.7.1 INTERRUPTING THE CURRENT PROGRAM
To interrupt a running program, touch the "On-Off" button (P9) briefly.
The message "STOP?" will flash on the second line of the display.
Confirm and reset the device by pressing the confirm button P5.
User Manual
with cycle running. The A
0
193909105 rev.04
icon is illuminated when the parameter's value
0
BPW1260 – BPW4260
Page 54 – 107
Advertisement
Table of Contents
