How To Set The Display System - Owon SDS5052E-V User Manual

Figure 5-29 The displayed waveform after the noise is removed under the
Average Mode, in which the average number of 16 is set.

How to Set the Display System

Press the Display button and the menu displayed in the screen is shown as Figure 5-30.
The description of the Display Set Menu is shown as follows:
Function Menu
Type
Persist
XY Mode
Trig Freq
VGA Disp
(VGA
port is optional)
Display Type: With the F1 menu selection button pushed down, you can shift between
5.Advanced User Guidebook
Figure 5-30 Display Set Menu
Setting
Dots
Vect
OFF
1 second
Time 2 seconds
5 seconds
Infinity
Clear
ON
OFF
ON
OFF
ON
OFF
Description
Only the sampling points are displayed.
The space between the adjacent sampling points
in the display is filled with the vector form.
Turn the M knob to set the persistence time
Clear the persistence
Turn on the XY display function;
Turn off the XY display function.
Turn on the Trig Freq ;
Turn off the Trig Freq .
Connect the VGA port to a monitor. If set it as
ON, the waveform could be displayed on the
computer monitor.
45