Table of Contents
Advertisement
Place the mouse cursor on Cursor 1 or Cursor 2, drag after the mouse shape changing to
, adjust the position of Cursor 1 and Cursor 2
according to the waveform to be measured. The cursor increment window on the bottom left of FFT window shows current frequency of the two
cursors, absolute frequency difference of the two cursors. (See figure below)
Vamp Measurement: Tick on "Amplitude", enter Home page->Math->FFT, then two light red lines represent Cursor 1 and Cursor 2 show along
the horizontal direction on FFT window.
Place the mouse cursor on Cursor 1 or Cursor 2, drag after the mouse shape changing to
, adjust the position of Cursor 1 and Cursor 2
according to the waveform to be measured. The cursor increment window on the bottom left of FFT window shows current position of the two
cursors, absolute voltage amplitude difference of the two cursors. (See figure below)
9.How to Set the Display System
Click
to show Function menu, choose "Display".
Display Type
Click the button to choose the display type (the chosen button has a
mark).
Vector: The space between the adjacent sampling points in the display is filled with the vector form.
Dots: Only the sampling points are displayed.
19
Advertisement
Table of Contents
