Table of Contents
Advertisement
6. Click "End Record" to stop recording, or wait until the Counter reaches the End Frame.
Note:
1.Waveforms of two channels can be recorded simultaneously.
2.You can turn on/off the channels while recording. Only channels turned on can be recorded. If a channel is turned off while recording, there will
be no waveform of this channel after the frame when stopped.
Replay the waveform recorded
1. Choose "Play" tab on the top. (The chosen button has a
mark.)
2. Click "From..." to choose the waveform file to be replayed.
3. Set the start frame "Sta" and end frame "End".
4. Set Interval Time for replaying.
5. Check "Cycle" to play back the waveform in a loop. Uncheck it to replay just once.
6. Click "Play". "Numbers" shows the current frame number that is replayed.
7. Click "Pause" to pause it.
8. Drag slider to display the frame you need.
Note:
1. If the software is in Run status, playing back will make the current acquisition stopped.
2. When replaying, entering other menu items will make the replay paused.
14.How to Implement the Utility setting
Click
to show Function menu, choose "Utility".
26
Advertisement
Table of Contents
