Dmm Menu; Dmm Information Window - Owon XDS3204AE Manual

DMM Menu

Push the DMM button on the front panel to enter/exit the multimeter function. The button
backlight will be lighted when the multimeter function is enabled.
The bottom menu of multimeter is as below:
Menu Setting
Current
Voltage
R
C
Hold ON OFF
Relative
Show Info
ON OFF
Configure
Auto Range
Switch Range
Current
mA 10A
(Only for current
measurement)

DMM Information Window

The Multimeter Information Window is displayed on the top right of the screen.
5.Use the Multimeter (Optional)
Figure 5-2 Multimeter Button
ACA Measuring AC current
DCA Measuring DC current
ACV Measuring AC voltage
DCV Measuring DC voltage
Measuring resistance
Testing diode
Testing for continuity
Measuring capacitance
Freeze the display during measurement.
When making relative measurements, reading is the
difference between a stored reference value and the
input signal.
Show/Hide the information window
Select auto range mode
Select manual range mode, press to switch range
Select the current range.
Description
25