Working From the Schedule Tab
Use the Schedule tab to schedule routine Zero.
Figure 3-11.1.
Schedule tab.
Abort button
Zero Now button
Adjust Offset check box
Set Clock (Time Synchronization)
PN 305804902, Rev A
Click to terminate Verification or Zero.
Click to begin Zero cycle now.
Checked
The analyzer performs an offset adjustment at the end of the Zero
cycle.
Not checked
The analyzer verifies only.
Click Set Clock to synchronize the clock within the analyzer with the PC.
The Time Synchronization box opens with the PC time and date and the
analyzer time and date. Click Synchronize to set the time, or click Cancel
to close the box.
|
Controller/Interface
3-21