Table of Contents
Advertisement
Installing and connecting the device
3.1
Preparing for installation
3.1.1
Checking delivery
Check the package contents for visible signs of transport damage and for completeness.
Note
Do not install parts damaged during shipment. In the case of damaged parts, contact your
Siemens representative.
The documentation belongs to the HMI device and is required for subsequent
commissioning. Retain all enclosed documentation for the entire service life of the HMI
device. You must pass on the enclosed documentation to any subsequent owner or user of
the HMI device. Make sure that every supplement to the documentation that you receive is
stored together with the original documentation.
3.1.2
Device identification data
Unpacking the device
The device can be clearly identified with the help of this identification data in case of repairs
or theft.
Enter the identification data in the table below:
Identification date
Serial number
Order number of the device
Ethernet address 1
Mobile Client900WXN
Operating Instructions, 04/2015, A5E35883103-AB
Source
Value
Rating plate
S ...
Rating plate
6AV....
Rating plate
MAC.:
3
29
Advertisement
Table of Contents
