Opening The Operator Screen; Figure 25 Password Screen - Quantum P2000 Series User Manual

Chapter 3 Operator Commands

Opening the Operator Screen

Opening the Operator Screen
Figure 25 Password
Screen
46
To open the Operator screen:
Press the Operator tab.
1
The GUI displays the password screen (see
Enter the correct operator password to gain access to the
2
Operator screen (see
The default operator password is 1234.
Note: To change passwords, see
"Command in Progress" dialog box is displayed.
page 66
ATL
P R O D U C T S
O
ATL P2000 Series Automated Tape Library User's Guide
figure 26).
Press Continue. A
3
figure 25).
on