Quantum LTO 3 User Manual page 84

SCSI Commands: 21BLOG SENSE
Message Code 2
Repeat Count 4
Thread Count 4
Total Data Sets 4
Timestamp 4
Firmware 8
Version
Cartridge 8
Manufacturer
Cartridge Serial 10
Number
The Message Code reported for the event. These values are defined
in this manual in Appendix A: Message Codes.
The number of times in succession that this event occurred without a
different event occurring.
The number of times a cartridge had been threaded during the lifetime
of the drive when the event occurred.
The total number of data sets written during the lifetime of the drive
when the event occurred.
The time in eight millisecond units at which the event occurred. The
timer starts with a value of zero when the drive is powered on.
The ASCII string representing the version of firmware in the drive
when the event occurred.
The ASCII string representing the manufacturer of the cartridge in the
drive when the event occurred.
The ASCII string representing the serial number of the cartridge in the
drive when the event occurred.
Page 76