Table of Contents
Advertisement
SCSI Commands: 21BLOG SENSE
Flag
51
Tape directory
invalid at
unload
55
Loading failure
56
Unrecoverable
unload failure
59
WORM
medium
integrity check
failed
60
WORM
medium
overwrite
attempted
3.9.13.2
3
ASC/ASCQ per error list
4
MIC cartridge memory usage
information and drive EEPROM
usage information indicates
excessive read/write problems
with this cartridge
5
ASC/ASCQ per error list
Required Host Message
W
The tape directory on the tape cartridge
just unloaded has been corrupted. File
search performance will be degraded. The
tape directory can be rebuilt by reading all
the data.
C
The operation has failed because the
media cannot be loaded and threaded.
1. Remove the cartridge, inspect it as
specified in the product .manual, and retry
the operation.
2. If the problem persists, call the tape
drive supplier help line.
C
The operation has failed because the
medium cannot be unloaded:
1. Do not attempt to extract the tape
cartridge.
2. Call the tape driver supplier help line.
W
The tape drive has detected an
inconsistency during the WORM medium
integrity checks. Someone may have
tampered with the cartridge.
W
An attempt had been made to overwrite
user data on a WORM medium:
1. If a WORM medium was used
inadvertently, replace it with a normal data
medium.
2. If a WORM medium was used
intentionally:
a) Check that the software application is
compatible with the WORM medium format
you are using.
b) Check that the medium is bar-coded
correctly for WORM.
Drive Conditions Setting/Clearing TapeAlert Flags
Condition Setting Flag
Error preventing he
tape directory being
updated on unload.
The drive is unable to load
the media and thread the
tape.
The drive is unable to
unload the medium.
Someone has tampered
with the WORM medium.
The application software
does not recognize the
medium as WORM
Condition
Clearing Flag
Rewind or Unload
Hard error
Unload
Media
Rewind or Unload
Read failure
Page 69
Cause
Flag Name
Advertisement
Table of Contents
