Quantum LTO 3 User Manual page 255

DSM_WR_MIC_EOD_UPDATE_WITH_NULL_DS
DSM_WRITE_LOCATED_BUT_NO_APPEND_DS
DSM_WRITE_READ_PAUSED_BUT_NO_APPEND_DS
DSM_GOT_READ_WHEN_POSITION_UNKNOWN
DSM_SPACE_EOD_DS_NOT_EOD
DSM_MIC_READ_CART_PAGE_GOT_CRC
DSM_MIC_WRITE_EOD_PAGE_GOT_CRC
DSM_CMPR_SET_MAXSIZE_NOT_MODULO_32
TAPE_SERVO_NEVER_RECOVER
TAPE_BAD_MIC_TD
TAPE_BAD_MIC_EOD
TAPE_FIRST_DS_APPEND_FAIL_OLD_HIGH_WPC
TAPE_APPEND_FAIL_OLD_HIGH_WPC
TAPE_WRITE_LOOP_EXT_FAIL
TAPE_READ_SERVO_CMD_REJECT
TAPE_SERVO_GAIN_CALIB_FAIL
TAPE_READ_SEEK_TARGET_OVERSHOOT
TAPE_READ_FOUND_TARGET_PLUS_N
TAPE_HARD_READ_ADJACENT_TRACK_IS_OVERW
RITTEN
TAPE_READ_4METERS_TIMEOUT
TAPE_READ_TIMEOUT_NO_SERVO_RESPONSE
TAPE_READ_BOW_DS_NOT_FOUND
TAPE_READ_LAST_WRAP_DS_NOT_FOUND
TAPE_READ_BAD_CM_AND_BAD_FID
TAPE_SEEK_ISB_UNDERRUN
TAPE_SEEK_ISB_SVO_FAIL
TAPE_SEEK_ISB_EOWRAP
TAPE_SEEK_ISB_UNKNOWN
TAPE_READ_SERVO_OVERSHOOT
TAPE_BAD_CLEAN_CARTRIDGE
TAPE_OUT_OF_CLEAN_TAPE
TAPE_SEEKER_MISSING_DS
TAPE_CHAN_HOC_GAIN_CALIB_FAILED
TAPE_NULL_PTR_TP_LIST
TAPE_INVALID_PHYS_LP6
TAPE_ABORT_STATUS
TAPE_HARD_READ_ERROR_RETRY_EXHAUSTED
TAPE_CHAN_BOTH_SERVO_HEADS_BAD
TAPE_CHAN_UPPER_SERVO_HEAD_BAD
TAPE_CHAN_LOWER_SERVO_HEAD_BAD
TAPE_SRV_FAIL_REPORT_EW
TAPE_RED_ZONE_ERR_RETRY_EXHAUSTED
TAPE_APPEND_ON_TRACK_FAIL
TAPE_SERVO_GAIN_CALIB_RETRY_FAIL
TAPE_SERVO_GAIN_CALIB_RETRY_GOOD
TAPE_ON_TRACK_NEVER_ON
TAPE_WRITE_BOW_ON_TRACK_FAIL
TAPE_READ_SWITCH_WRONG_WRAP
TAPE_HARD_READ_ERROR_CORNER_RETRY_FAILE
manager
37Bh Data set
manager
37Ch Data set
manager
37Dh Data set
manager
37Eh Data set
manager
37Fh Data set
manager
380h Data set
manager
381h Data set
manager
382h Data set
manager
383h Tape to 4bf
384h Tape SEEK: Bad MIC TAPE DIRECTORY page error
385h Tape SEEK: Bad MIC EOD INFORMATION page error
386h Tape
387h Tape
388h Tape Write: WRITE_LOOP_EXT command fail.
389h Tape Read: Servo cmd reject
38Ah Tape servo gain calib failed
38Bh Tape Read: Could not find target after seek
38Ch Tape Read: Detect DSn+k
38Dh Tape Read: Hard Read Error due to adjacent track is overwritten
38Eh Tape Read: Has no Data Set Interrupt for more than 4 meters
38Fh Tape Read: 20 seconds timeout wait for Servo response
390h Tape Read: Could not find BOW data Set
391h Tape Read: Could not find the last Data Set at end-of-wrap
392h Tape Read: Could not read FID
393h Tape Seek: Hardware reports isb underrun error
394h Tape Seek: Hardware reports isb svo fail error
395h Tape Seek: Hardware reports isb eowrap error
396h Tape Seek: Hardware reports isb unknown error
397h Tape Read: Servo overshoot
398h Tape Tape: Bad cleaning cartridge
399h Tape Tape: Out of cleaning tape
39Ah Tape Read: Seeker missed data set buffer
39Bh Tape head offset gain calibration failed
39Ch Tape Read: Detect Null pointer in tp_ds_list
39Dh Tape Tape: auto_load sequence for detecting invalid phys lp6
39Eh Tape Tape: abort status for command that has just been aborted
39Fh Tape Tape: could not recover data
3A0h Tape Tape: per tape servo gain calib: both channels failed
3A1h Tape Tape: per tape servo gain calib: upper channel failed
3A2h Tape Tape: per tape servo gain calib: lower channel failed
3A3h Tape Write: WP fail to report early warning at end of wrap.
3A4h Tape Tape: Red Zone Error retry exhausted.
3A5h Tape Write: On track signal fail when try to detect the last DS for
append.
3A6h Tape servo gain calib retry failed
3A7h Tape servo gain calib retry good
3A8h Tape Read: On_Track signal is not ON
3A9h Tape Write: On track signal fail when try to start to write at BOW.
3AAh Tape Read: DSM commands to switch to opposite direction
3ABh Tape Read: Failed to reread at corner