Quantum LTO 3 User Manual page 61

SCSI Commands: 21BLOG SENSE
3.9.4.1 Supported Log Page Field Descriptions
Field Bytes Bits
Page Code 0 0-5
Page Length 2-3
Supported 4
Log Pages
Log
Write Error 5
Counters
Log
Read Error
6
Counters
Log
Sequential 7
Access
Device Log
Temperature 8
Log
TapeAlert 9
Response
Log
Device 10
Statistics Log
Tape 11
Diagnostic
Data Log
Protocol 12
Specific Port
Log Page
TapeAlert 13
Alert Log
Tape Usage 14
Log
Tape 15
Capacity Log
Data 16
Compression
Log
Error Events 17
Log
Vendor 18
Unique Error
Counters
Drive Usage 19
Log
Tape Device 20
Statistics Log
Reserved
Description
Always 10h, indicating the page length.
Always 00h, the page code of the Supported Log Pages Log Page
Always 02h, the page code of the Write Error Counters Log Page
Always 03h, the page code of the Read Error Counters Log Page
Always 0Ch, the page code of the Sequential Access Device Log
Page
Always 0Dh, the page code of the Temperature Log Page
Always 12h; the page code of the TapeAlert Response Log
Always 14h, the page code of the Device Statistics Log Page
Always 16h, the page code of the Tape Diagnostic Data Log Page
Always 18h, the page code of the Protocol Specific Port Log Page
(SAS drives only)
Always 2Eh, the page code of the TapeAlert Log Page
Always 30h, the page code of the Tape Usage Log Page
Always 31h, the page code of the Tape Capacity Log Page
Always 32h, the page code of the Data Compression Log Page
Always 33h, the page code of the Error Events Log Page
Always 3Ah, the page code of the Vendor Unique Error Counters
Log Page
Always 3Ch, the page code of the Drive Usage Log Page
Always 3Eh, the page code of the Tape Device Statistics Log Page
Always 0.
Page 53