Error Detection Summary In Log Sense Command Descriptor Block - Quantum DLT 4000 Product Manual

SCSI Commands
LOG SENSE Command (4Dh) (continued)
5.8.1

Error Detection Summary in LOG SENSE Command Descriptor Block

The following conditions constitute errors detected by the drive relating to the
LOG SENSE command descriptor block. The request sense data is set to
ILLEGAL REQUEST, INVALID FIELD IN CDB.
Error conditions occur when:
A page is not supported
The parameter pointer is larger than the highest numbered parameter on the
page
The SP bit is set to 1
The Allocation Length is smaller than the data being returned by the target.
PPC bit is set to 1
5-42 Quantum DLT 4000 Tape Drive