Polycom MGC Manager User Manual page 354

Chapter 8 - Recording
8-6
When these components are configured, you will be able to record the
recording-enabled conferences running on your MCU and to monitor the
recordings and playbacks on the ReadiRecorder.
Recorder
Readi software includes a default IVR Service.
The following illustration describes the ReadiRecorder configuration:
Configure the IP
Address
Install the MGC
Manager
Start the MGC
Manager
•
Installing the MGC Manager application is mandatory in the workflow only in
cases when you are:
— installing the application for the first time
— updating the software version
For detailed information about installing MGC Manager, connecting to
the MGC unit, and using the application's main window, menus and tool-
bar buttons, refer to the MGC Manager User's Guide, Volume I,
Chapter 3, "MGC Manager Basics." For information about how to con-
figure the ReadiRecorder components, see the ReadiRecorder Getting
Started Guide.
Add the
Recorder
Readi to
the MCUs
Network
Connect to the
Recorder
Readi
(Optional)
Configure SSL
Security
Configure
Network Services
Configure
IVR Services
Configure
Recording and
Playback Services
Configure
Recording System
Settings