Polycom MGC Manager User Manual page 273

25. Select the SilenceIT options and voice messages.
lThe following table summarizes the SilenceIT options:
Table 6-10: IVR Service Properties - SilenceIT Messages
SilenceIT
Message
SilenceIT Menu
Unmute and Return
to Conference
Return to the
Conference Muted
Unmute Reminder
MGC Manager User's Guide - VoicePlus Edition
Description
Select the message played when a participant is
automatically muted by the MCU. It notifies
participants that the line has been muted and
indicates which DTMF code they should enter to
listen to the available options. The default voice
message is: "Your line has been muted due to a
noisy line. For list of available options, press 9."
Note: This message is mandatory.
Select the message that indicates which DTMF code
participants should enter to return to the conference
unmuted. The default voice message is: "Press 1 to
unmute and return to the conference."
Note: This message is mandatory.
(Optional) Select this check box to enable the option
to return to the conference muted. Then select the
message indicating the DTMF code to use.
The default voice message is: "Press 2 to return to
the conference muted."
Select the message that indicates which DTMF code
to enter to unmute the participant's line once they
return to the conference muted. This message is
played once, as a reminder when the participant has
selected to return to the conference muted.
The default voice message is: "Press #, 6 at any time
to unmute your line."
Note: This message is enabled when the Return to
the Conference Muted check box is selected.
6-33