Muting Dial-In Participants Upon Connection - Polycom MGC Manager User Manual

Chapter 4 - Operations Performed During On Going Conferences

Muting Dial-In Participants Upon Connection

4-28
You can set a conference to automatically mute all dial-in participants who
were not defined before or during the On Going Conference. You can enable
this option when defining a conference/reservation, or during an On Going
Conference by the following methods:
From the conference right-click menu
•
From the chairperson DTMF input device (remote control/telephone),
•
pressing the appropriate DTMF code
When the Mute "Meet Me" Parties option is cancelled, undefined participants
who dial in, are not muted. However, the participants who were previously
muted by the MCU using this feature, are not automatically unmuted when
this option is cancelled.
•
The Mute "Meet Me" Parties feature applies to undefined participants
connecting to Meeting Room, Meet Me per Conference Access conference
types.
This feature does not apply to standard pre-defined dial-in participants.
To activate the Mute "Meet Me" Parties feature:
1. Expand the On Going Conferences list.
2. Right-click the icon of the conference and click Mute 'Meet Me'
Parties.