Polycom MGC Manager User Manual page 217

YES (default) is set to NO.
Roll Call is not supported with the Guidance feature or when the
•
participant is moved from the Operator conference (attended status) to
the Home Conference.
Roll Call is not supported when the participant is moved from one
•
conference to another. The participant name is not announced when the
participant leaves the first conference and enters the second conference.
Roll Call is not supported with the Invite feature. When a participant is
•
invited to the conference by the chairperson, the invitee name is not
recorded and therefore not announced when the participant enters or
leaves the conference or during the Roll Call.
Table 4-6 lists the Roll Call actions and the corresponding DTMF codes.
Table 4-6: Roll Call DTMF Options
Default
Operation DTMF
Code
Enable Roll Call *32
Disable Roll Call #32
Roll Call Review *33
Names
Roll Call Stop #33
Review Names
MGC Manager User's Guide - VoicePlus Edition
Description
Enables the Roll Call feature for the
conference.
Disabled, the Roll Call feature for the
conference. However, participants names are
still recorded in case the Roll Call feature will
be enabled later, during the conference.
Requests to play the recorded names of the
participants connected to the conference, one
after the other, in the order in which they
entered the conference.
When requested, the system stops the Roll Call
playback.
4-73