Volume - Polycom VSX3000 Integrator's Reference Manual

Integrator's Reference Manual for the VSX Series

volume

4 - 290
Sets or gets the call audio volume (not sound effects) on the VSX system or
registration for volume changes.
Syntax
volume <register|unregister>
volume <get|up|down|set {0..50}>
Parameter
register
unregister
get
up
down
set
Feedback Examples
• volume registered
• volume set 10
returns
volume 10
and a subsequent command
volume up
returns
volume 11
Comments
Changes the call audio volume (not sound effects) on the VSX system.
User interface screen location: System > Admin Settings > Audio (page 3):
Master Audio Volume
Description
Registers to receive notification when the volume
changes.
Disables register mode.
Returns the current volume level.
Increases the audio volume by 1.
Decreases the audio volume by 1.
Sets the volume to a specified level. Requires a volume
setting from {0..50}.