H331Dualstream - Polycom VSX3000 Integrator's Reference Manual

h331dualstream

Set or gets the dual stream setting used for H.331 calls. This command is only
applicable if you have a V.35 network interface connected to your system.
Syntax
h331dualstream <get|on|off>
Parameter
get
on
off
Feedback Examples
• h331dualstream yes
• h331dualstream no
Comments
This value cannot be changed during a call.
User interface screen location: System > Admin Settings > Network >
V.35/RS-449/RS-530 (page 5): Enable People+Content
Command History
Introduced in version 7.5.
Description
Returns the current setting.
Turns on dual stream for H.331 calls.
Turns off dual stream for H.331 calls.
System Commands
4 - 127