Waitfor - Polycom VSX3000 Integrator's Reference Manual

Integrator's Reference Manual for the VSX Series

waitfor

4 - 292
This command is used within script files or control panel programs to wait for
a specific event before executing the next statement. It causes the API session
to wait until a call being placed either connects or fails, or until system is ready
to place a call (such as after a reboot waiting for the ISDN lines to come up).
Syntax
waitfor <callcomplete|systemready>
Parameter
callcomplete
systemready
Examples
Feedback examples:
• waiting for call complete
• call is complete
• waiting for system ready
• system is ready
Comments
This command can be used to synchronize a remote controller with the system.
The API session echoes the message
or is aborted.
See Also
See the command on page 4-228.
run
Description
Causes the API session to wait until a call being placed
either connects or fails.
Causes the system to return the message "system is
ready" when the system is ready to make a call.
"call complete"
when the call connects