Pridialchannels - Polycom VSX3000 Integrator's Reference Manual

Integrator's Reference Manual for the VSX Series

pridialchannels

4 - 202
Sets or gets the number of PRI channels to dial in parallel. This command is
only applicable if you have a PRI network interface connected to your system.
Syntax
pridialchannels get
prichannels set {1..n}
Parameter
set
get
{1..n}
Feedback Examples
pridialchannels set 3
returns
pridialchannels 3
Comments
By default, ISDN channels are dialed three at a time. On PRI systems, you can
choose the number of channels to dial in parallel.
User interface screen location: System > Admin Settings > Network > ISDN
(page 3): Number of Channels to Dial in Parallel
This screen is only accessible if you have a PRI network interface connected to
your system.
Description
Sets the number of PRI channels to be dialed in
parallel when followed by a parameter from {1..n}. To
erase the current setting, omit the parameter.
Returns the current number of channels dialed in
parallel.
Range of numbers of PRI channels that can be dialed
in parallel. For PRI T1, the range is 1..12. For PRI E1,
the range is 1..15.