Streammulticastip - Polycom VSX3000 Integrator's Reference Manual

streammulticastip

Sets or gets the multicast IP address for streaming.
Syntax
streammulticastip get
streammulticastip set ["xxx.xxx.xxx.xxx"]
Parameter
get
set
"xxx.xxx.xxx.xxx"
Feedback Examples
• streammulticastip <empty>
• streammulticastip set xxx.x.xx.xx
returns
streammulticastip xxx.x.xx.xx
Comments
A default address is entered for you based on your system's serial number.
This ensures that you do not have the same multicast address as another
Polycom system. You can change this default address using this command.
User interface screen location: System > Admin Settings > Network > IP >
Streaming: IP Multicast Address
Description
Returns the current setting.
Sets the multicast IP address when followed by the
"xxx.xxx.xxx.xxx" parameter. To erase the current
setting, omit the parameter.
Multicast IP address.
System Commands
4 - 251