Vcrrecordsource - Polycom VSX3000 Integrator's Reference Manual

vcrrecordsource

Sets or gets the VCR record source.
Syntax
vcrrecordsource get
vcrrecordsource <near|far|auto|content|content-or-near|
content-or-far|content-or-auto|none>
Parameter
get
near
far
auto
content
content-or-near
content-or-far
content-or-auto
none
Feedback Examples
• vcrrecordsource auto
• vcrrecordsource near
• vcrrecordsource near
Comments
If Monitor 2 is enabled, VCR Record Source is automatically set to the
Monitor 1 image and cannot be configured.
User interface screen location: System > Admin Settings > Monitors >
Monitors (page 2): VCR Record Source
Description
Returns the current setting.
Sets the VCR to record the near-site video source.
Sets the VCR to record the far-site video source.
Sets the VCR to automatically record the current
speaker in a point-to-point call.
Sets the VCR to record content, when presented.
Sets the VCR to record near-site video or content,
when presented.
Sets the VCR to record far-site video or content, when
presented.
Sets the VCR to record the current speaker or content,
when presented.
Sets the VCR to record nothing.
System Commands
4 - 285