Polycom VSX3000 Integrator's Reference Manual page 17

In addition to their integrated main camera, VSX 7000 and VSX 7000s systems
provide an S-Video input for a second camera. You can use the RS-232 serial
port on the VSX 7000 or VSX 7000s system for camera control. Refer to the
release notes for a list of supported PTZ cameras.
You can connect a camera to the VCR video input on any VSX system (except
the VSX 3000 executive desktop systems). On the VSX 6000 and VSX 6000A
systems, the video input is for a composite video signal. VSX 5000, VSX 6000,
and VSX 6000A systems do not provide pan/tilt/zoom (PTZ) control for a
second camera.
Plenum-rated CAT5 cable adapters are available from several
manufacturers such as Sound Control Technologies and Vaddio. These
cables allow you to connect cameras up to several hundred feet away.
PowerCam as the Main Camera up to 10 ft Away
You can connect a PowerCam (part number 2215-50370-001) to a VSX 8000 as
the main camera up to 10 ft away using:
PowerCam Primary cable shown on page
•
S-Video to BNC adapter shown on page
•
2-16
2-11
1 1
1 1
2
90-250VAC 50/60Hz 4A
IR
PC CARD
3 1 VG A
1 2
VCR/DVD
2
IOIOIO
1 2 VG A
LAN
Room Integration
1 - 5