Areacode - Polycom VSX3000 Integrator's Reference Manual

Integrator's Reference Manual for the VSX Series

areacode

4 - 22
Sets or gets the area code for all ISDN BRI lines. This command is only
applicable if you have a BRI network interface connected to your system.
Syntax
areacode get
areacode set "areacode"
Parameter
get
set
"areacode"
Feedback Examples
areacode set 212
returns
areacode 212
Comments
This area code is associated with the area where the VSX system is used.
User interface screen location: System > Admin Settings > Network > ISDN
(page 2): Area Code (for Line 1, Line 2, Line 3, and Line 4)
Description
Returns the area code information.
Sets the ISDN BRI area code when followed by the
area code parameter. To erase the current setting, omit
"areacode".
Area code to use for all BRI lines.